Monthly Subscription Starting at AED 99 + VAT

Solar Energy System Design
  • Level Professional
  • المدة 17 ساعات hours
  • الطبع بواسطة The State University of New York
  • Offered by

عن

Solar Energy System Design builds upon the introduction to PV systems from Solar Energy Basics course, which included basic system components and functions, as well as some basic system sizing using simplifying assumptions. You should at this point have a basic understanding of electrical power and energy, be able to calculate the energy needs of a site as well as energy production potential for a PV system at a given location under optimal conditions. Much of this course will focus on incorporating on the ground conditions into energy production considerations, and how to account for these conditions in system design and equipment selection. By the end of this course you should be able to incorporate losses in irradiance due to array setups with less than optimal positioning and/or shading, and account for variations in module output due to temperature variations in your system design.

الوحدات

Course 2 Welcome

    • 1 Videos
Show info about module content

1 Videos

  • Welcome from Dr. Neal Abrams

Energy from the Sun

    • 2 Videos
    • 1 Assignment
Show info about module content

1 Assignment

  • Solar energy

2 Videos

  • The Sun and the Solar Spectrum
  • The Sun-Earth Relationship

Sunlight from space to the Earth's surface

    • 1 Videos
    • 1 Assignment
Show info about module content

1 Assignment

  • Sun-atmosphere interactions

1 Videos

  • The Sun and Atmosphere

Dealing with the variation in sunlight across the Earth

    • 4 Videos
    • 1 Readings
    • 1 Assignment
Show info about module content

1 Assignment

  • Variation in insolation

4 Videos

  • Solar Irradiance
  • Finding Solar Insolation
  • Using Insolation Data
  • Insolation to PV Energy

1 Readings

  • Getting insolation data from NREL

Module 1 Quiz

    • 1 Assignment
Show info about module content

1 Assignment

  • Solar energy from source to panel

Circuitry basics

    • 2 Videos
    • 1 Assignment
Show info about module content

1 Assignment

  • Circuitry Basics

2 Videos

  • Electricity and Circuits
  • The PV Circuit

Circuits and electrical characteristics of PV modules and arrays

    • 3 Videos
    • 1 Readings
    • 1 Assignment
Show info about module content

1 Assignment

  • PV modules and array circuits

3 Videos

  • Measuring power in a PV circuit
  • PV and Electrical Interactions- Efficiencies from cell to array
  • Electrical characteristics in PV arrays- Variations in productivity

1 Readings

  • Bypass diodes vs. blocking diodes

Module 2 Quiz

    • 1 Assignment
Show info about module content

1 Assignment

  • Photovoltaic module and array electrical characteristics

Sizing PV systems and calculating site specific output

    • 2 Videos
    • 2 Assignment
Show info about module content

2 Assignment

  • Module and array conditions
  • PV Watts Practice

2 Videos

  • PV Sizing and Output
  • Orientation and Tilt

PV output changes with temperature

    • 2 Videos
    • 1 Readings
    • 1 Assignment
Show info about module content

1 Assignment

  • Temperature dependent output

2 Videos

  • Temperature Dependent Output
  • Temperature Dependent Output as a Percent

1 Readings

  • Finding critical temperature data

Shading losses

    • 3 Videos
    • 1 Readings
    • 2 Assignment
Show info about module content

2 Assignment

  • Shading Practice
  • Shading calculations using PV Watts

3 Videos

  • Measuring Shading at a Site
  • Analyzing Shading and Calculating Insolation
  • PV Output Reduction Due to Shading

1 Readings

  • Tools for Measuring Shading

Module 3 Quiz

    • 1 Assignment
Show info about module content

1 Assignment

  • PV Sizing and output under different conditions

Site surveys, checklists, and an introduction to permitting

    • 2 Videos
    • 1 Readings
    • 1 Assignment
Show info about module content

1 Assignment

  • Site surveys and permits

2 Videos

  • Module 4 Introduction
  • Residential Site Survey

1 Readings

  • Site checklists and Unified Solar Permits

System design from module and array selection, to sizing strings of modules

    • 3 Videos
    • 1 Assignment
Show info about module content

1 Assignment

  • Module and inverter selection quiz

3 Videos

  • Array Sizing and Module Selection
  • Inverter Sizing and Selection
  • String sizing for the inverter

Module 4 Quiz

    • 1 Assignment
Show info about module content

1 Assignment

  • Grid tied design Quiz

Putting it all together quiz

    • 1 Readings
    • 1 Assignment
Show info about module content

1 Assignment

  • Putting it all together

1 Readings

  • Putting it all together to design a photovoltaic system

Capstone Project

    • 1 PeerReview
Show info about module content

1 Peer Review

  • Capstone Project

Auto Summary

Discover Solar Energy System Design, a professional-level course that builds upon Solar Energy Basics, offered by Coursera. This course delves into advanced PV system design, focusing on real-world conditions, energy production, and equipment selection. Over 1020 minutes, learners will master how to account for irradiance losses and temperature variations in their designs. Available with Starter and Professional subscription options, this course is ideal for those with a foundational understanding of electrical power and energy, aiming to specialize in solar energy systems.

Neal Abrams
Instructor

Neal Abrams